好看的电视剧,完结小说,遮天

Home > Application > CNC Machine Tool CNC Machine Tool

GSK 25i CNC System Applies on the Product Component Trial Processing Center on the Company of Baojia V6C Machining Center from Jiangmen Province

Customer Requirements:

Using the dedicated machine tools and systems are configured with the machining (Baojia V6C matches with the GSK25i system);
To try machining the customer’s components based upon the drawing and workpiece raw-material of the customers;
The machining time of each workpiece that confirms with the processing requirements should be controlled within three minutes;
Provide the desired tools during the processing, such as the clamping chucks and the list of tool handle types; it is convenient to the customer for purchasing.

Troubleshooting:

The workpiece is designed as the four-axis and one clamping-one injecting and clamping side by side with single-row based upon the customer’s component appearance and the desired machining component.
Using the dedicated tool, and design the trial of the machining technology in the analogy software to guarantee the efficiency.

Machining Effect：

Column component, 100% override machining, the machining circular time for one piece is 2 minutes and 20 seconds. It is not convenient for the customer to remove the burrs by hand due to the tool wear, big burr after the small batch is produced; and it is agree that adding the tool fine-milling to reduce the burrs. When the customer sends the raw material and then machines for 20 pieces, the burrs can be removed only need using the abrasive paper; and the customer satisfies this effect.
Handle component, 100% override machining; the 10 pieces of the machining circular time is 3 minutes and 26 seconds and the single one is 20.6 seconds.

天天干夜啪-天天干夜夜-天天干夜夜爱-天天干夜夜叭-天天干夜夜操